ACOS to ROAS: How to Convert Your Amazon Ads Numbers and Judge Them Against Book Royalties
InteliAds Team
KDP Ads
Your Amazon Ads console shows ACOS, a friend's screenshot shows ROAS, and a blog post quotes a "good" number for one that you cannot map to the other. Learning to go from ACOS to ROAS takes about ten seconds of arithmetic, but the harder part is deciding whether either number means you are making money on a book. This guide covers the conversion first, then how to judge the result against what the book actually pays you per sale.
Before changing a bid: check break-even ACOS, then compare InteliAds plans (Essential has no trial). Create an account when the number says the keyword is still worth it.
Short answer: ROAS is 1 divided by ACOS, and ACOS is 1 divided by ROAS. An ACOS of 35% is a ROAS of about 2.86, and an ACOS of 50% is a ROAS of 2.0. Neither figure says whether you profit, because both are measured against the book's price, not your royalty. Compare your ACOS to your break-even ACOS (royalty divided by price), or your ROAS to its reciprocal, before you raise or cut a bid.
Why a book ad report needs both ratios side by side
ACOS and ROAS describe the same relationship from opposite ends. ACOS asks how many cents of ad spend it took to produce a dollar of sales. ROAS asks how many dollars of sales came back for each dollar of spend. In Sponsored Products reports for Amazon KDP ads, the console leads with ACOS, while many ad tools, courses, and communities quote ROAS, so authors end up comparing numbers in different languages.
The practical risk is misreading a target. Someone says "aim for a ROAS of 3" and you set a bid rule at 3% ACOS, or someone says "keep ACOS under 30%" and you assume that is a ROAS of 30. Holding both ratios in one report removes that translation step and makes thresholds comparable across campaigns and across advice.
Both ratios share one blind spot for books. They are built on ad sales, which is the list price times units, and not on royalties, which is what you keep. A paperback priced at $14.99 may pay you under a third of that after printing costs. That gap is why the same ROAS can be profitable for one title and a loss for another, a theme covered in KDP royalties vs Amazon Ads sales.
The reciprocal rule: converting ACOS to ROAS and back
The rule is two lines. Write ACOS as a decimal, so 35% becomes 0.35.
- ROAS = 1 / ACOS. At 0.35, ROAS is 1 / 0.35 = 2.86.
- ACOS = 1 / ROAS. At a ROAS of 4, ACOS is 1 / 4 = 0.25, or 25%.
- Shortcut: divide 100 by the ACOS percentage. 100 / 35 is about 2.86.
Because it is a reciprocal, the relationship is not linear. Moving ACOS from 50% to 40% lifts ROAS from 2.0 to 2.5, but moving it from 20% to 10% lifts ROAS from 5.0 to 10.0. Low ACOS values produce very large ROAS values, so small percentage changes at the low end look dramatic in ROAS and modest in ACOS.
One rounding habit helps: keep two decimals on ROAS and one on ACOS. Rounding ROAS to a whole number hides real differences. A ROAS of 2.86 and one of 3.0 correspond to ACOS of 35% and 33.3%, which can sit on opposite sides of a break-even line.
Bid-desk tip: always convert from the raw spend and sales totals when you can. Converting from an already rounded ACOS compounds rounding error, especially on campaigns with only a handful of orders.
A conversion table for common ACOS targets
Authors usually think in round ACOS targets, so these are the pairs worth memorizing. Each ROAS is rounded to two decimals.
- 10% ACOS equals ROAS 10.00
- 20% ACOS equals ROAS 5.00
- 25% ACOS equals ROAS 4.00
- 30% ACOS equals ROAS 3.33
- 35% ACOS equals ROAS 2.86
- 50% ACOS equals ROAS 2.00
- 100% ACOS equals ROAS 1.00
The table below lists the figures you need for the whole conversion and shows where royalties enter. The example values come from a hypothetical $14.99 paperback that pays a $4.80 royalty per sale, with $111.00 of spend and $344.77 of ad sales.
| Report figure | How you get it | Hypothetical value | Role in the ACOS to ROAS check |
|---|---|---|---|
| Spend | Total ad cost for the period | $111.00 | Numerator of ACOS, denominator of ROAS |
| Ad sales | Units times list price | $344.77 | Denominator of ACOS, numerator of ROAS |
| ACOS | Spend / ad sales | 32.2% | The console figure you convert |
| ROAS | Ad sales / spend, or 1 / ACOS | 3.11 | The same result expressed as a multiple |
| Royalty per sale | Amount KDP pays on one unit | $4.80 | Sets what the ad can afford to cost |
| Royalties earned | Royalty per sale times orders | $110.40 | The money to compare against spend |
| Break-even ACOS | Royalty / price | 32.0% | The ACOS ceiling before the ad loses money |
| Break-even ROAS | 1 / break-even ACOS | 3.12 | The ROAS floor to hold |
Read the last two rows as the real targets. The console never shows them, because it does not know your royalty. A 35% ACOS that looks healthy would already lose money on this title, since the break-even is 32.0%.
Worked example: one paperback, three campaigns, two ways of reading them
This is a labeled hypothetical for one $14.99 paperback with a $4.80 royalty per sale. Break-even ACOS is 4.80 / 14.99, or 32.0%, and break-even ROAS is 3.12. Over one month, three Sponsored Products campaigns ran against it.
- Auto campaign: $38.00 spend, 10 orders, $149.90 ad sales. ACOS 25.4%, ROAS 3.94. Royalties $48.00, so +$10.00 after ads.
- Category targeting: $52.00 spend, 8 orders, $119.92 ad sales. ACOS 43.4%, ROAS 2.31. Royalties $38.40, so -$13.60 after ads.
- Exact keywords: $21.00 spend, 5 orders, $74.95 ad sales. ACOS 28.0%, ROAS 3.57. Royalties $24.00, so +$3.00 after ads.
Read as ACOS, the category campaign stands out at 43.4%, well above the others. Read as ROAS, the same campaign sits at 2.31 against a floor of 3.12. Either way, it is the only campaign below break-even, and the conversion lets you confirm that from whichever number your report or advice source uses.
Combined, the account spent $111.00 for $344.77 in sales, which is an ACOS of 32.2% and a ROAS of 3.11. Royalties were $110.40, so the month finished about -$0.60, effectively break-even. A total that looks flat can hide one losing campaign funded by two winners, so convert each campaign before judging the blend.
A tool that stores your royalty per title makes this check automatic. The KDP advertising dashboard in InteliAds tracks spend, ACOS, and royalties by campaign so you can see profit after ads without redoing the arithmetic. The KDP ads guide covers the wider setup, and InteliAds pricing lists plans if you manage several books or accounts. You can also create an InteliAds account to connect your data.
Where ROAS misleads authors: royalty versus list price
ROAS multiplies your spend into list-price revenue, so it treats a $16.99 paperback as if you kept $16.99. You keep far less. On a book printed at a high cost per copy, a ROAS that looks respectable can be a clear loss.
Here is a fresh labeled hypothetical: a $16.99 paperback with a hypothetical print cost of $7.64, which leaves a royalty of about $2.55 per sale. A campaign spends $51.00 and records 6 orders, or $101.94 in ad sales. That is a ROAS of 2.00 and an ACOS of 50.0%. Royalties come to $15.30, so the campaign finishes -$35.70 after ads.
The ROAS never looked broken. It only looked low in the way many ROAS numbers look low, and the author could easily have read 2.00 as "I get double my money back." The money that came back was list-price revenue, and most of it went to Amazon and the printer.
These are the traps to check before trusting a ROAS figure:
- Price-based totals: confirm that "sales" in your report means units times list price, not royalties.
- Mixed formats: a campaign advertising a paperback and an ebook blends two different royalty rates into one ROAS.
- Discounted prices: a promotional price shrinks ad sales and royalties unevenly, so last month's target may not hold.
- Page reads: Kindle Unlimited income is not in ad sales, so ROAS can understate a campaign's value on KU titles.
Bid-desk tip: write the royalty per sale next to the campaign name in your notes. If you cannot state it from memory, you cannot judge the ROAS.
Setting a ROAS floor from your own royalty and print cost
The floor is one division: minimum ROAS = list price / royalty per sale. It is the same as 1 divided by your break-even ACOS. For the $16.99 paperback above, 16.99 / 2.55 gives a floor of about 6.66, which matches a break-even ACOS of 15.0%.
Print cost drives this more than most authors expect. A high print cost leaves a thin royalty, and a thin royalty pushes the ROAS floor up. The table below compares three hypothetical titles and shows what to do when the live ROAS falls short.
| Hypothetical title | Royalty per sale | Break-even ACOS | Minimum ROAS | Action if live ROAS is below the floor |
|---|---|---|---|---|
| $16.99 paperback, $7.64 print cost | $2.55 | 15.0% | 6.66 | Lower bids on spending keywords, cut targets with no orders, or reconsider the price |
| $4.99 ebook at 70% | about $3.49 | about 70% | 1.43 | Check campaign mix and sample size before touching bids |
| $2.99 ebook at 35% | about $1.05 | about 35% | 2.86 | Trim bids gradually and review search terms that drive clicks without orders |
A floor only gets you to zero. If you want profit, set a target above it. A common approach is to add a margin, so a floor of 6.66 becomes a working target of about 8.0, which leaves room for returns, price changes, and reporting lag.
Work through the floor in this order in the console:
- Find the royalty per sale for each format you advertise in your KDP reports.
- Divide list price by royalty to get the minimum ROAS, and write it next to the campaign.
- Open the Sponsored Products campaign report and compute ROAS from raw spend and sales totals.
- Sort targets by spend, and review those with the most spend and the lowest ROAS first.
- Lower bids or pause targets only when enough clicks and orders support the decision.
InteliAds supports this workflow with royalty-aware profit, so spend is compared against royalties and not just list-price sales. You can build Sponsored Products rules with a dry run that previews which keywords or targets a rule would change before anything is applied, and use targeting filters to narrow rules to specific campaigns or match types. It reports and suggests changes from your data, and it does not guarantee a particular result.
FAQ
Q: If my ACOS is 35%, what is my ROAS, and how do I calculate it without a calculator? A: Your ROAS is about 2.86. Divide 100 by 35: since 35 times 3 is 105, slightly over 100, the answer sits just under 3.
Q: Why does a ROAS of 2.0 feel profitable but still lose money on a paperback? A: A ROAS of 2.0 equals an ACOS of 50%, so you spent half of the list price to make each sale. Unless your royalty is more than half the price, which is rare for printed books, the ad costs more than the sale pays you.
Q: Does the ACOS to ROAS conversion change when the ad sells a Kindle ebook at 70% royalty versus 35%? A: No, the conversion is always 1 divided by the other ratio. What changes is the break-even. A 70% royalty gives a floor near 1.43, while a 35% royalty gives a floor near 2.86, before any delivery costs on the 70% option.
Q: How do I turn my break-even royalty percentage into a minimum ROAS target? A: Divide 1 by the royalty as a decimal. A 30% effective royalty gives 1 / 0.30, or a minimum ROAS of 3.33. Then add a margin if you want profit and not just break-even.
Q: Should I track ACOS or ROAS if my main goal is Kindle Unlimited page reads? A: Either one works for the arithmetic, but neither captures page-read income because it is not in ad sales. Track one of them next to KENP reads and treat the ratio as incomplete evidence.
Q: Why don't my ROAS figures match when I convert campaign-level ACOS to ROAS by hand? A: The usual causes are rounding the ACOS before converting, comparing different date ranges, and sales that are still being attributed to the period. Convert from raw spend and sales totals, using the same date window for both.
Q: Can I average ACOS across campaigns and then convert to ROAS, or must I convert each one first? A: Do not average ACOS. Add up total spend and total sales, then convert. For example, a campaign with $10 spend at 20% ACOS and one with $90 spend at 50% ACOS average to 35% simply, but combine to $100 over $230, which is 43.5% ACOS and a ROAS of 2.30, not 2.86.
Q: What ROAS should I expect if my ACOS is below 10%, and is that always a good sign? A: Expect a ROAS above 10. It is not always good news: it can reflect a small sample, bids too low to win impressions, or a few sales from branded searches. Check it against your break-even ROAS, and ask whether more spend could add profitable orders.
The short version of acos to roas is that you divide 100 by ACOS to get ROAS, then compare the result with a floor built from your own royalty and print cost. If you want that comparison tracked per campaign, See InteliAds plans or Create an account. Essential has no trial, while Pro and Publisher include a 7-day trial that requires a card.
Browse more KDP ads guides on InteliAds.
See InteliAds plans: compare Essential, Pro, and Publisher (Essential has no trial; Pro and Publisher include a 7-day trial). InteliAds is a Sponsored Products manager for KDP authors: royalty-aware profit when KDP Sync is linked, user-written IF/THEN rules with dry run, and targeting filters for keywords, product targets, and search terms. Create an account.
Tools and guides: KDP ads optimizer