Back to Blog
GuidesNovember 7, 2026· 9 min read

Amazon Ads for KDP Beginners: Your First Campaign

I

InteliAds Team

Amazon KDP PPC

Amazon Ads for KDP Beginners: Your First Campaign

Short answer: to run Amazon Ads for a KDP book, make sure the book is live, work out your break-even ACOS, then build two Sponsored Products campaigns: one automatic and one manual with 10 to 20 keywords you chose. Give each about $5 a day, bid close to Amazon's suggested bid, and do not judge anything for seven days. At 30 days, compare your ACOS to your break-even, add the search terms that sold as exact keywords, and block the ones that only spent. That is the whole loop. Nobody can promise you a result, but this setup limits how much you can lose while you learn.

Step 0: check that you can advertise this book

Amazon Ads for books is built for books that can be bought right now. Before you open the console, confirm four things:

  • The book is live. Not "in review", not a draft. The product page should load and show a Buy button for at least one format.
  • It is in a marketplace where ads are offered. The US store is the usual start. The campaign runs only in the marketplace of the profile you build it in.
  • The page is ready. A cover that reads at thumbnail size, a clear title and subtitle, a description that says who the book is for, and a price that matches your genre. Ads send people to this page. They cannot repair it.
  • You have a few reviews if you can. This is not a rule, but a book with no reviews converts worse, and you pay for every click that does not convert.

You reach the console from the Promote and Advertise option in your KDP bookshelf, or directly from Amazon Ads.

Step 1: know your break-even ACOS before you spend a dollar

ACOS is ad spend divided by ad sales. It tells you how much you pay for each dollar of sales. The number that matters is not a "good ACOS" from a forum. It is your break-even ACOS: net royalty divided by list price. Above it, each sale loses money. Below it, each sale makes money before read-through.

Two examples, as arithmetic only:

  • A Kindle ebook at $4.99 with a 70% royalty nets about $3.39 after the delivery fee. Break-even ACOS is about 68%.
  • A $14.99 paperback at a 60% royalty with $4.50 print cost nets $4.49. Break-even ACOS is about 30%.

The same click price is much harder to pay back on the paperback. Enter your own numbers into the break-even ACOS calculator and write the result on a sticky note. It decides every later choice in this guide. If you are new to the metric, the ACOS calculator shows how spend and sales turn into a percentage.

Step 2: choose Sponsored Products

Amazon offers several ad formats. Sponsored Products is the one most KDP authors start with: your book appears in search results and on product pages, and you pay per click. It is simple and the data is readable. Other formats ask for more creative work and more budget.

Step 3: auto versus manual

You choose how targets are picked when you build a campaign.

AutomaticManual
Who picks the targetsAmazon, from your book's page and categoryYou: keywords or specific products (ASINs)
Setup effortLowMedium
ControlLow, but you can set bids by group (close match, loose match, substitutes, complements)High: match type and bid per target
Best forDiscovering what people searchSpending on terms you already trust
Main riskIrrelevant searchesToo few impressions if the terms are rare

For a first book, run both. The automatic campaign is your research tool: it shows, in the search terms report, what shoppers type before they buy something like your book. The manual campaign is where you spend on terms you picked on purpose. After a month you move the winners from the automatic campaign into the manual one.

What to put in the manual campaign

Pick 10 to 20 targets. Mix three kinds:

  • Descriptive keywords a reader would type: genre, topic, trope, or "travel guide to [place]".
  • Books that sit next to yours. Product targeting on the ASINs of similar books puts your ad on their pages.
  • Your own earlier books if you have any, so a reader already looking at one sees the next.

Use phrase and exact match to start. Broad is fine in the automatic campaign, where wide reach is the point. Keep one book per campaign. If you mix books, you cannot tell which one the money is working for.

Step 4: a realistic daily budget

Amazon's minimum daily budget is very low, but a minimum is not a realistic number. The question is: how many clicks do you need before the data means anything?

From one real KDP account, the average click over three years has cost $0.86 and it has taken about five clicks to get one order. Use that as a rough picture, not a forecast, because your genre and price will differ. At those numbers:

  • $5 a day buys about six clicks, or roughly one order.
  • Two campaigns at $5 a day is $10 a day, or about $300 for 30 days. That is about 350 clicks.
  • One week at $10 a day is about 80 clicks. That is enough to see whether the ads show and whether the cover gets clicked, but not enough to judge sales.

So the realistic starting point is $5 to $10 a day in total, for at least 30 days. If that month's cost is more than you can afford to lose while learning, wait or start with a single campaign at a lower budget. A budget under $2 a day does not collect enough data to teach you anything, and it will tempt you to judge on three clicks.

Step 5: starting bids

The console shows a suggested bid and usually a range for each target. For your first campaign, start near the middle of the suggested range. Too low and you will get few impressions (see why KDP ads get no impressions). Too high and you will overpay for clicks before you know what converts.

Check the bid against your break-even. A rough test: the most you can afford per click is your net royalty times the share of clicks that become orders. If about one click in five turns into an order, a paperback netting $4.49 supports a click of about $0.90 at most. That is why one account in this series caps bids at $0.90 and floors them at $0.45. Those are its settings, not a rule, but the logic carries over: bids follow the royalty.

Two settings to choose now:

  • Bidding strategy: pick dynamic bids, down only. It lowers your bid when Amazon thinks a click is unlikely to convert, and it never raises it. It is the safest default for a first campaign.
  • Placement adjustments: leave them at zero for now. You can test top-of-search later, once you have a baseline.

Step 6: what to look at after 7 days

Do not read ACOS this week. Amazon can attribute orders up to 14 days after a click, so week one's numbers are incomplete. Check three things only:

  1. Are you getting impressions? If not, work through the checklist in the impressions guide.
  2. Is the click rate sensible? Impressions with almost no clicks usually point to the cover, title or price, not to the ad.
  3. Are the search terms relevant? Open the search terms report. If you see clearly wrong terms ("free pdf", another genre), note them for negatives, but do not rush.

Do not change bids and budgets on day three because of a bad morning. One order or none in a week is normal at this scale.

Step 7: what to look at after 30 days

Now you have about 350 clicks if you followed the budget above. Read in this order:

  1. ACOS against your break-even. Under it, the campaign is paying for itself. Over it, find where it leaks.
  2. Cost per order. Spend divided by orders. Compare it with your net royalty. For scale, one account's whole-history figure is $4.26 per order at a 25.5% ACOS. That is one account in one set of genres, not a target.
  3. Search terms with orders. Add them as exact targets in your manual campaign, with a bid a little under your cap.
  4. Search terms with many clicks and no orders. These are candidates for negatives. See the next section.
  5. Targets with no impressions. Replace them with more common phrases.

Then change one or two things, not ten. The whole job after the first month is to move spend from what does not sell to what does.

Step 8: when to add negative keywords

Do not add negatives in the first week. A search term needs time and clicks to prove it fails. A sensible trigger is a term with roughly twice your usual clicks per order and zero orders over 60 days. Words that are clearly wrong for your book, such as "free" or "download", can go on the list straight away.

Use negative exact to block one search and negative phrase to block a word wherever it appears. The full method, with book examples and a monthly routine, is in negative keywords for Amazon book ads. The cost of skipping it is real: on one account, 1,281 keywords spent $2,277.91 and never sold a book, which is 4.6% of everything that account has spent.

Common beginner mistakes

  • Judging at day three. Too little data and incomplete attribution.
  • Skipping the break-even calculation. Then no ACOS number means anything.
  • Running ads on a page that does not convert. Fix the cover and description first.
  • Changing everything at once. You will never learn which change did what. Change a little, write it down, wait.

If you would rather not apply these checks by hand, tools can do it. InteliAds lets you write them as rules, preview them with Dry Run, and restore any change from the execution log. It is optional. The method above works in a spreadsheet.

FAQ

How much should a beginner spend on Amazon Ads for a book?

Plan for $5 to $10 a day in total for at least 30 days. At typical book click prices this gives a few hundred clicks, which is the minimum to read results. Spend only what you can afford to learn with, and never promise yourself a return.

Should I start with an automatic or a manual campaign?

Run one of each. The automatic campaign finds the searches real shoppers use. The manual campaign spends on terms you chose. After a month, move the search terms that sold from automatic into manual as exact targets.

How long before I know if my ads work?

Give it 30 days, with a first quick check at 7 days for impressions and clicks only. Orders can be credited up to 14 days after a click, so early ACOS is incomplete.

What ACOS should I aim for?

Aim for anything below your own break-even ACOS, which is net royalty divided by list price. It differs for every book and format, so calculate yours with the break-even ACOS calculator instead of copying a number from someone else's book.

Tools and guides

Put these rules to work

Set IF/THEN conditions, run them every hour, and revert any batch when you need to.