KDP Ads Not Getting Impressions: 7 Causes and Fixes
InteliAds Team
Amazon KDP PPC
Short answer: if your KDP ads are not getting impressions, the cause is almost always one of seven things: the campaign is not actually live (status, budget or review), the bid is too low to win the auction, the book is not yet eligible or relevant for the terms you picked, the keyword has almost no searches, or the match type is too narrow. Check them in that order. The first three take five minutes and have a clear fix. The rest need a few days of data before you change anything.
What "no impressions" actually means
An impression is one showing of your ad on a results page or product page. If the Impressions column says 0, nobody was shown your ad. That is different from "impressions but no clicks" (a cover, price or title problem) and from "clicks but no sales" (a product page or targeting problem). With zero impressions nothing else can happen yet, so the question is simply: why is Amazon not showing this ad?
The confusing version is "KDP ads delivering but no impressions". The campaign says Delivering, but the numbers stay at zero. "Delivering" only means the campaign is allowed to run. It does not mean it is winning any auctions.
First, look at the right level. A campaign can have thousands of impressions while one keyword inside it has none. Open the campaign, then the targeting tab, and sort by impressions. Decide which of two situations you are in:
- Everything is at zero. The problem is above the keyword level: status, budget, review, eligibility.
- Some targets show impressions, others do not. The problem is at the keyword level: bid, search volume, relevance, match type.
The checklist
Use this table from top to bottom. Stop at the first row that fits, fix it, and wait before touching anything else.
| # | Cause | How to check | What to change | Wait or act? |
|---|---|---|---|---|
| 1 | Campaign or ad group not live | Status column shows Paused, Scheduled, Ended or Out of budget; start date in the future | Enable it, fix the dates | Act now |
| 2 | Ad still in review | Ad or campaign shows a review or pending state | Nothing, unless it was rejected; then fix the reason given | Wait up to a few days |
| 3 | Book not eligible to be advertised | Book not live, not buyable, or in a restricted category | Fix the listing or availability first | Act now |
| 4 | Daily budget used up early | Budget column hits 100% before midday | Raise the budget or cut the number of targets | Act now |
| 5 | Bid too low | Your bid is well under the suggested bid range shown for the target | Raise the bid in small steps | Act, then wait 3 days |
| 6 | Keyword with almost no searches | Target has been live a week with 0 impressions while its siblings have many | Replace it with a more common phrase | Wait 7 days first |
| 7 | Match type too narrow or not relevant | Only exact match on a long phrase, or terms that do not describe the book | Add phrase or broad, or an auto campaign for discovery | Act, then wait 7 days |
1. Status, dates and budget
This is the least glamorous cause and the most common one. Check the campaign, the ad group and the ad separately, because each has its own status. A paused ad group inside an enabled campaign shows no impressions. A start date set to tomorrow shows none either. A campaign that says Out of budget ran earlier in the day and stopped.
Budget deserves a second look because it can hide behind a "Delivering" status. If your daily budget is $5 and you have 80 keywords, the first few auctions of the morning can use it all, and the keywords that would have shown later in the day get nothing. The cure is not always a bigger budget. Often it is fewer targets in that campaign, or a budget split by book so one title cannot starve another.
2. Review delay
New campaigns and edited ads go through a review before they run. Amazon's own help pages describe this as taking up to a few days in some cases, and it can be slower during busy periods. While an ad is in review it cannot get impressions. If the campaign is under two days old and shows a review or pending state, the correct action is to do nothing.
If the ad was rejected, the status will say so and give a reason. Fix that reason, such as a cover or description problem, and resubmit.
3. The book itself
An ad can only run for a book that can be bought. Check that the book is live (not "in review" or "draft" in KDP), that the product page loads, and that the format you advertise is available. A title in a restricted category may not be eligible at all. If the product page shows the book as unavailable, ads will not show for it no matter how high the bid is.
4. Bids below what the auction needs
Sponsored Products works as an auction. If your bid is much lower than what others pay for the same placement, you simply do not appear. The console shows a suggested bid range for each keyword. A bid in the bottom of that range, or under it, will get few or no impressions on competitive terms.
A rule of thumb from one account: the floor that account uses is $0.45 and the cap is $0.90 (the cap sits just above its average click price of $0.86). Below the floor, ads on competitive terms mostly stop showing. That is one account's setting, not a universal number. Your floor depends on your genre and competition, which is why the suggested bid range is the first thing to read.
How to raise bids safely:
- Raise by $0.05 to $0.10, not by doubling.
- Wait 72 hours before judging. Impressions often respond within a day, but the effect on clicks and orders takes longer to read.
- Check your break-even ACOS first. If your royalty cannot pay for a higher click price, the answer is a different keyword, not a higher bid. Use the break-even ACOS calculator to see your ceiling.
5. Relevance and indexing
Amazon shows your ad when it believes your book matches the search. For a new book, that belief is weak. The book has no sales history, few or no reviews, and its category and keyword data may still be settling. In this phase, broad and auto campaigns tend to get impressions sooner than exact-match campaigns on competitive terms.
Two practical checks:
- Is the keyword about your book? If you wrote a cozy mystery set in a lighthouse and you target "lighthouse photography", Amazon has no reason to show you. Target terms a real reader of your book would type.
- Does your own metadata agree? Your title, subtitle, categories and the seven keyword slots in KDP should point at the same topic as your ad keywords. A mismatch makes you less relevant for exactly the terms you are paying for.
6. Low-volume keywords
Some keywords do not have impressions because nobody searches for them. This is normal and it is not a fault. If you added 40 long phrases in exact match, expect a share of them to stay at zero for weeks. The way to tell: a keyword with a reasonable bid, in a live campaign, that has had a week without a single impression, while other keywords in the same ad group are showing. That keyword is probably too rare.
What to do:
- Do not keep raising the bid on a term with no searches. It will not create demand.
- Replace it with a shorter, more common phrase from the same idea.
- Or pause it and leave the budget to the targets that are working.
Scale makes this worse. One account has 14,012 keyword rows across all states, and nobody checks that by hand every week. A repeatable check can be a rule that flags targets enabled for a set number of days with no impressions. Preview it first with Dry Run, which lists the targets a rule would touch before anything changes.
7. Match types
Match type controls how closely a search must match your keyword.
- Exact: the search must be the keyword or a very close variant. Few impressions, high relevance.
- Phrase: your words in that order, with other words allowed around them.
- Broad: the widest reach. More impressions, more irrelevant ones.
If a new campaign is only exact match on long phrases, low impressions are expected. Add a phrase version of your three best terms, or run one auto campaign alongside to let Amazon find terms for you. When the auto campaign's search terms report shows what converts, move those into exact campaigns. Match type is a trade: more reach costs you more irrelevant clicks, which is why you pair it with negative keywords later (see negative keywords for Amazon book ads).
When to wait and when to change
Wait when the campaign is under 48 to 72 hours old, when it is in review, or when you changed a bid in the last 72 hours.
Act when the status is paused or out of budget, when the book is unavailable, when the bid is under the suggested range, or when a target has had a full week with nothing while similar ones perform.
Whatever you change, change one thing and write it down: what, when and why. If impressions do not move after three to seven days, the cause was something else, and you can undo the change cleanly. An execution log with a restore option, which InteliAds keeps for every change a rule makes, does this automatically. A notebook does it fine too.
FAQ
Why does my KDP campaign say Delivering but have zero impressions?
Delivering means the campaign is eligible to run, not that it is winning auctions. The usual reasons are a bid too low for the term, a keyword with almost no searches, or an ad that is still in review. Check the suggested bid range and how old the campaign is before changing anything else.
How long should I wait before I decide an ad is not working?
Give a new campaign 72 hours before judging impressions, and about seven days before deciding that a specific keyword is too rare. Click and order data needs longer, because sales can be attributed up to 14 days after a click.
Will raising my bid always fix zero impressions?
No. A higher bid helps only when price is the problem. If the campaign is paused, out of budget, in review, or the keyword has no searches, a higher bid changes nothing and just raises your cost when the ad does start to show.
Do new books get fewer impressions?
Often yes. A new book has no sales history or reviews, so Amazon has less evidence to show it on competitive terms. Start with auto and broad targeting, give it a week or two, and move proven search terms into exact match afterwards.
Tools and guides
- Break-even ACOS calculator: find out how high a bid your royalty can support.
- ACOS calculator: turn spend and sales into ACOS.
- KDP ads optimizer: rules, Dry Run and an execution log for your campaigns.
- Amazon Ads for authors: the full overview.
- Negative keywords for Amazon book ads
- Amazon Ads for KDP beginners